Aft Deck for
Grant MacLaren's
1972 Correct Craft Skier
MacSkier

Aft
Click photo for larger image.

Wiring to aft deck:

  • 360 clear light on ensign pole
  • Blower
  • Fuel gauge w/light
  • 360 clear light/ensign pole
Wire to aft deck:
  • White (ground?)
  • Red (fuel gauge -- from ignition switch)
  • Green (blower)
  • Black (lights -- ensign pole & gauge)
"Local" wiring:
  • Brown & Yellow -- (from gauge thru sender to gauge)

Fuel level Sender:

Fuel
Click photo for larger image.

Fuel
Click photo for larger image.

Aft
Click photo for larger image.

2/1/14: The fuel tank's interior has been cleaned and coated, exterior painted radiator black -- all by West End Radiator, 15605 Manchester Rd. Ellisville, MO. I've removed and shortened that threaded lifting ring rod. (Why was it -- the 3/4 inch fine-threaded rod -- made that long by CC? Also, why was the rod not fully installed into the lifting ring.)

Aft
Click photo for larger image.

Aft
Click photo for larger image.

Anyway, it's been fixed now (2/6/14) and will be properly re-installed.

Aft
Click photo for larger image.

There are two "hook eyes" under the aft deck. We think they are there as "grips" to pull the deck from the mold used to make the boat:

Aft
Click photo for larger image.
Aft
Click photo for larger image.

3/14/14 --

Aft
Click photo for larger image.
Today I asked (on the CC forum) about the gauge (G) and the light (L) pictured above. The answer(s) were that on early CC models there was a mechanical gauge in the tank, and a viewing window in the deck. The light was connected to the running lights, illuminating the gauge for viewing at night.

For now, I'll remove the light.

"It needed a little work, but what boat doesn't?"

HOME

Ads are selected by Google.
Another pretty good web page by Grant MacLaren